General Technical Specifications
 
     
 
No. PARAMETERS THERMOCOUPLES RESISTANCE TEMP. DETECTORS (RTD’s) – PT-100
1.
Type K, J, T, E, R, S, B  
2
SS pipe sheathing MI (flexble) OR Rigid Stem. MI (flexble) OR Rigid Stem.
3.
Insulation Material MgO MgO
4.
Diameter 0.5 mm onwards 1 mm onwards
5.
Construction Grounded / Ungrounded / Open 2, 3, 4, 6, 8 wire
6.
ConfigurationNo. of Thermal Pairs Simplex, Duplex, Triplex
7.
Measuring / Permissible Deviation /Class of Tolerance 0.75 % OR 2.2°C whichever is higher. PT-100 element type:
Class A – [0.15 + 0.002 (t)]°C
Class B – [0.3 + 0.005 (t)]°C
Better than class A also available.
8.
Model No. See designs
9.
Dimensions (min/max diameter) 0.5mm to 1” 1mm onwards usually up to 10mm.
10.
Type of Termination Head, Cable, flying leads, handle with cables for portable hand – held probes
11.
Isolation Resistance (at ambient temperatures) > 100MW to > 1000MW at 500V D.C. depending on diameter.
12.
Operating Temperature (-) 273 °C to (+) 1800°C (-) 200 °C to (+) 600°C
13.
Sheath Materials. Inconel-600, Incoloy-800, Hestalloy B & C, Monel, Nickel, Ceramic KER-610, Recrystallised Alumina KER-710, Quartz / Glass, Graphite, SS-446, SS-316, SS-310, SS-309, SS-304, etc.
14.
Coatings and surface treatments Blion, Halar, Stellite, Tungsten Carbide, Chromium Oxide, Ceramic (alumina), PTFE(Teflon), Hard Anodizing, Hard Chrome, etc…
 
     
 
15.
Process Connections Adoptors (couplings), Holders (lock-cap), adjustable glands, bolts, etc..· Flanges and sanitary fittings
 
     
 
16.
Terminal Head
Cast Aluminum Powder Coated with SS chain, SS head, GI head small head, Flame proof / Weather proof type IP65, 67, 55.
 
     
 
17.
Cables Extension – up to t/c range.· Compensating – 0-200° C. · Tinned Copper.· Silver Copper.
18.
Type Single Strand and Multi Strand
19.
Cable Insulation Mineral insulated, Silicon Rubber, PTFE, Fiberglass, PVC and ceramics· Special and custom made cables
20.
Cable protection covering Screen: Individual or overall Copper / SS / Aluminum with Mylar tape; Flexible Conduit G.I. / S.S.· Armour: GI round wire / Flat wire.
21.
Color Coding As per IS / DIN / ANSI
 
     
 
22.
Thermowell Bar stock & Tube stock (fabricated / tube welded) designs· Made as per customer designs
23
Type Cylindrical, Flanged, conical (tapered), two step narrowed tip, etc..· With replaceable sleeves of special material like Nickel 200, Monel 400, etc..
 
     
  Standard Colour Codes    
This site is best viewed with Internet Explorer 7.0 or higher.
Web Solutions
by SAVIT INTERACTIVE